Product Description
Key Features:
- True double-conversion
- Microprocessor control optimizes reliability
- Input power factor correction
- Output power factor 0.8 / 0.9
- Wide input voltage
- Converter mode available
- Cold start function
- Generator compatible
- SNMP+USB+RS-232 multiple communications
- Comprehensive display allows easy monitoring and
access of UPS status
BPS 1KVA to 5KVA True Online UPS Technical Specifications:
| MODEL | BPSHF1000 | BPSHF2000 | BPSHF3000 | BPSHF5000 | |
| CAPACITY | 1KVA/800W | 2KVA/1600W | 3KVA/2400W | 5KVA/4000W | |
| INVERTER TYPE | IGBT BASED DSP TECHNOLOGY | ||||
| INPUT | Voltage Range | 150V AC – 270VAC ,Single Phase | |||
| Frequency | 46Hz-54Hz | ||||
| Power Factor | ≥0.98 | ||||
| OUTPUT | Voltage | 230V AC,Single Phase | |||
| Voltage Regulation | ±1% | ||||
| Load Regulation | ±2% | ||||
| Frequency | 50Hz ± 0.2Hz | ||||
| Power Factor | 0.8 Standard / 0.9 Optional | ||||
| Waveform | Pure Sine Wave | ||||
| Total Harmonic Distortion | < 3% Linear load, < 5% non linear load | ||||
| Crest Factor | 3∶1 | ||||
| Overload Capability | 5 Minutes at 110% load | ||||
| Efficiency(on line mode) | >89% | ||||
| BATTERY | DC Voltage | 24VDC/36 VDC | 72 VDC / 96 VDC | 72 VDC / 96 VDC | 192 VDC / 240 VDC |
| Recharge Current | Adjustable | Adjustable | Adjustable | Adjustable | |
| Transfer Time | 0ms (AC mode→Battery mode) | ||||
| Noise Level (1m) | ＜45dB | ||||
| Ambient Temperature | 0~45℃ | ||||
| Duty Cycle | Continuous | ||||
| Cooling | Forced air cooling | ||||
| Bypass Switch | Static bypass switch / Manual bypass Switch (Optional) | ||||
| Humidity | 0~95% (Non-condensing) | ||||
| Sea Level Elevation | ＜1500m | ||||
| Metering | LCD Display input/output Voltage, Frequency, Battery voltag, Battery capacity, Load Percentage. | ||||
| Protections | Input, Output – Low and High , Battery low and high voltage, Input, output – Fuse, Transient Surge,Battery – MCB/Fuse, Short circuit, Over load | ||||
| Trip Conditions | Over load, Over and Under voltage, Short Circuit,low battery,Over Temperature | ||||
| Indications | Mains ON, Inverter ON, Battery Low, Overload. | ||||
| Isolation Transformer |
Internally / Externally ( Optional) | ||||
| Alarms | Audio for extreme battery low voltage / Mains fail | ||||
| Communication | Smart RS232, SNMP(Optional),USB (Optional) | ||||
| *Specification and ups image are subject to change without notice due to constant improvement in design & technology. | |||||
